Custom Donut Boxes

Custom donut boxes printed with your logo and sized for one, two, six or twelve donuts. Choose a window lid, kraft or white board, inserts and a lid height that keeps glaze and sprinkles intact on the way home. Free design support, free shipping and a turnaround of 8 to 12 business days.

Custom donut boxes get a fresh batch from your counter to the break room with the glaze still on the donuts instead of smeared across the lid. Each one is a printed paperboard carton sized to the count you sell, from a single ring to a full dozen, and built tall enough to clear icing and sprinkles. We make custom donut boxes with or without a window lid, and every order includes free design support and free shipping.

What Is a Donut Box?

It is a wide, shallow carton that holds donuts next to each other in one layer, so every topping faces up and nothing presses down on it.

  • Single flat layer: pieces sit in rows rather than piles, which stops filled and frosted rings from squashing one another.
  • Hinged lid: the top is joined to the back wall, swings down over the base and tucks or locks at the front edge.
  • Air gap above the icing: the walls stand taller than the highest topping, leaving clear space under the lid.
  • Optional window: a die-cut opening in the lid, normally sealed with clear film, shows the assortment while the box stays shut.
  • Delivered flat: the blanks come unfolded and get set up behind the counter as orders arrive.

Donut Box Sizes by Count

Bakeries order custom donut boxes by how many pieces go inside. Most shops stock the counts in this table, while the exact measurements follow your donut diameter.

Count Usual layout Where it sells
Single One ring in the center, often under a window Grab-and-go, gourmet pieces, tasting samples
2-pack Two rings side by side Coffee pairings, kids’ treats, add-ons at the register
Half dozen (6) Three across and two deep Family orders and small meetings
Dozen (12) Four across and three deep Office runs, catering and fundraisers
Mini donuts and holes Loose, or set in a divided insert Party trays and sampling

These are counts the trade uses most often, not fixed sizes. A dozen box for standard rings is often around 14 by 10 inches across the base, yet oversized or filled donuts need extra room, so measure one piece at its widest point and tell us the count you sell most.

Keeping the Glaze Off the Lid

Most harm to a boxed donut comes from above: a lid that sags or slides drags right through the frosting.

  • Height set by the topping: measure your tallest decorated piece and add a small margin. Roughly 3 to 3.5 inches of inside height suits most glazed and iced rings, while piled toppings or cream-topped styles may need more.
  • Stiffer lid board: a thicker caliper or an E-flute lid spans a dozen box without dipping in the middle.
  • Grease barrier: board with a coating or liner on the food side slows the oil from fried dough as it creeps into the walls and through your print.
  • Divider insert: a paperboard insert holds each piece in its spot when the box tilts on the walk to the car.
  • Vent holes: small punched vents release steam from warm batches so the glaze stays set instead of turning tacky.

How well a box resists grease depends on the board and coating picked for your order. List your toppings on the quote and say whether donuts go in warm, and we will choose the inner surface to match.

Donut Box Styles

  • Lock-corner bakery style: the familiar one-piece carton with a hinged lid and corners that lock as it is folded, used for most half dozen and dozen orders.
  • Tuck-top single box: a small carton with a top flap, sized for one or two rings and often fitted with a front window.
  • Tray and sleeve: a printed sleeve slides over a shallow tray for gift sets and premium flavors; our tray and sleeve boxes page shows this construction.
  • Lid and base: a two-piece set where the top comes straight up off a matching tray, a good fit for boxes handed over at weddings and launches.

Window Lids and Bakery-Window Display

A clear panel sells the mix before anyone opens the box. Closed boxes stacked with their windows facing out turn a shop window or pastry shelf into a display of color while keeping dust away from the food.

  • Lid window: the usual pick for half dozen and dozen boxes, framing the whole spread from above.
  • Front or side window: suits single and 2-pack boxes that stand upright on a shelf or sit in a pastry case.
  • Window shape: a rectangle, rounded corners or a circle that repeats the ring of the donut.
  • Print around the frame: keep the logo and flavor names on the solid part of the lid so they stay legible once the window fills with sprinkles.

Stacking in Delivery

Drivers and catering staff often carry several custom donut boxes at a time, so each carton has to bear the weight of the ones above it.

  • Square corners: locked or glued corners keep the walls upright when another box rests on top.
  • Level lid: a flat top with no bulge lets boxes stack straight in a delivery bag or a car trunk.
  • Front lock: a tuck tab or lock slot keeps the lid shut if the stack shifts on a turn.
  • Edge print: flavor names or order labels on the front edge help staff find the right box without pulling the pile apart.

Materials for Custom Donut Boxes

White SBS Paperboard

Bright, smooth board that shows pastel artwork, photos and fine flavor text clearly. It is the classic look for shop-branded dozen boxes.

Kraft Paperboard

Rustic brown board made without bleaching. A one- or two-color logo stands out on it, which fits artisan and farmers market stands.

E-Flute Corrugated

A fine fluted board that keeps a wide lid flat and holds up under stacked delivery loads. Choose it for heavy filled donuts or long drives.

Let us know the donut count per box and the length of the drive, so the board caliper can be matched to that load. For the rest of your menu, browse the wider custom food packaging line.

Printing and Finishing for Custom Donut Boxes

Print Options

  • Four-color CMYK: bestseller photos, patterns and color fades over the lid and walls.
  • Pantone (PMS) inks: a set brand pink, orange or brown that matches on every reorder.
  • Under-lid print: a thank-you line, social handle or loyalty offer that greets the customer when the lid lifts.
  • Flavor panel: space for a flavor key, allergen note or QR code to your online menu.

Finish Options

  • Water-based aqueous coat: guards the print against sticky fingers.
  • Gloss or matte laminate: extra scuff resistance for gift and event boxes.
  • Foil stamping: gold or silver detail for holiday dozens and wedding favors.
  • Spot UV, embossing and debossing: a shiny or raised logo on the lid that guests notice.

Who Orders Custom Donut Boxes

  • Donut shops and bakeries: daily half dozens and dozens in one branded line. Whole cakes and pies need deeper cartons, which our bakery boxes handle.
  • Coffee shops and cafes: single and 2-pack boxes sold next to the espresso machine. Muffins and frosted cakes on the same counter fit better in cupcake boxes with round inserts.
  • Office and catering orders: stacks of dozens for morning meetings, each lid printed with your name. A mixed pastry order carried by hand rides well in custom gable boxes.
  • Weddings and parties: donut walls, favors and late-night snacks with the couple’s initials on the lid. Donut holes for guests can go in a branded oyster pail with a wire handle.
  • Fundraisers and school events: pre-sold dozens with the cause or team logo printed on top.
  • Food trucks and markets: kraft singles and 2-packs that hand over quickly at a busy window.

How to Order Custom Donut Boxes

  1. Request a quote: give the donut count per box, the width and height of the biggest donut you sell, the board, any window and the quantity for each size.
  2. Send your artwork: share your logo files and brand colors, and our free design support can lay them out on the dieline.
  3. Approve the proof: check that the logo clears the window cut and the lid fold so nothing important sits on a crease.
  4. We produce and ship: turnaround is 8 to 12 business days, and shipping is free.

Specifications

Box style Lock-corner bakery box with hinged lid, tuck-top single box, tray and sleeve, lid and base
Common counts Single, 2-pack, half dozen (6), dozen (12), mini donuts and donut holes
Size Built from your donut diameter, height and count per box
Inside height Set to clear your tallest topping
Materials Kraft paperboard, white SBS board, E-flute corrugated board, board with a grease barrier on the food side
Window Lid, front or side window with clear film, in a custom shape
Add-ons Divider inserts, vent holes, front lock tab
Printing CMYK, Pantone (PMS), under-lid printing
Finishing Spot UV, aqueous coating, embossing, matte or gloss lamination, debossing, foil stamping
Proof Digital proof and flat dieline sent for sign-off first
Minimum order Depends on the box size and material. Request a quote for your quantity
Turnaround 8 to 12 business days
Design and shipping Free design support and free shipping

FAQs

What size box do I need for a dozen donuts?

A dozen standard rings usually sit four across and three deep, and boxes for that layout often measure around 14 by 10 inches at the base. Send us your donut diameter, since larger or filled pieces need a wider base.

Yes. Small boxes for one or two rings are printed the same way as dozen boxes, and a front window helps them sell from the counter.

Measure the tallest decorated piece and leave a small gap above it. Around 3 to 3.5 inches of inside height covers most glazed rings, and stacked toppings may call for a deeper box.

A window is optional. Most half dozen and dozen boxes use a lid window, while singles often have one on the front, and each opening is covered with clear film.

Uncoated board can mark over time, so ask for board with a grease barrier on the food side. Tell us the toppings and whether batches go in warm, and we will pick the right inner surface.

Yes. A paperboard divider in custom donut boxes gives each piece its own space, which helps filled and heavily topped donuts arrive looking the way they left the case.

They can. Locked corners, a stiff lid and a front tab let several boxes ride on top of one another, and E-flute board adds strength for long drives.

Yes. Kraft gives the box a plain, handmade feel and pairs well with a simple logo in one or two inks.

They come flat to save storage space. Staff fold each blank into shape when an order is packed, which takes only a few seconds once the routine is learned.

Yes. A message, offer or pattern under the lid shows up as soon as the customer opens the box.

That figure varies by box size and the board you pick. Share your counts and quantities in a quote request so we can give you the exact figure.

Expect a turnaround of 8 to 12 business days after proof approval, and the finished order ships free.

Available Options

MATERIALS
1 Side Coated Card

SBS C1S

2 Side Coated Card

SBS C2S

Brown kraft

Brown Kraft

white kraft

White Kraft

black kraft

Black Kraft

Gold Metallic Paper

Metallic Paper

holographic paper

Holographic

textured paper

Textured

PRINTING METHODS
Offset Printing

Offset Printing

Digital Print

Digital Print

UV Printing

Screen Printing Machine

Screen Printing

FINISHING

Varnish

uv-printing

UV Coating

spot-golss-uv2

Spot UV

soft-touching-lamination

Soft Touch Lamination

Matte Lamination

Matte Lamination

Gloss Lamination

Gloss Lamination

PRINTING INKS
fluorescent-color-ink

Flourescent Inks

Ink

Water Based Inks

Pantone Book

Pantone

Metallic Pantone

Pantone Metallic

ADDITIONAL OPTIONS
Embossing

Embossing

debossing

Debossing

GOLD FOIL

Hot Foil Stamping

Window Patching

Window Patching