Custom Roll End Tuck Front Boxes

Custom roll end tuck front boxes (RETF) with rolled double end walls and a lid that locks at the front with tabs, so no tape is needed. Made to your inside size in E-flute corrugated, SBS paperboard or kraft, printed outside and inside. Turnaround is 8 to 12 business days. Design help and shipping are included free.

A roll end tuck front box locks its lid at the front with small tabs, so a mailer stays shut on its way to the customer without a strip of tape and still opens cleanly. We make custom roll end tuck front boxes from a single flat blank in E-flute corrugated, SBS paperboard or kraft, made to fit whatever you ship. You get free design support on the artwork, and shipping is on us.

What Is a Roll End Tuck Front Box?

It is a one-piece folding mailer with a hinged lid and doubled end walls. Quotes and dielines often shorten it to RETF, or to REFT for roll end front tuck.

  • Rolled end walls: each end panel folds back over itself, and its tabs drop into slots in the base, so both ends carry two layers of board.
  • Front closure: the deep flap on the lid comes down at the face of the box, where locking tabs, often called cherry locks, grip it.
  • Lid dust flaps: two narrow flaps on the lid fold in at the sides and close the gaps at the corners.
  • No glue anywhere: the blank is cut, scored and delivered flat, and your packer folds each box by hand.

Tuck Front, Tuck Top or Taped Shipper?

These three are the boxes buyers most often weigh up for e-commerce orders. The closure is what sets them apart.

Style How it closes Pick it when
Tuck front (this page) The lid flap finishes on the front face and is held by locking tabs You want a tape-free mailer whose front edge resists being pried open
Tuck top The lid flap slides down inside the front wall, leaving a smooth top edge The opening moment matters most; see our roll end tuck top boxes
Regular slotted shipper Four flaps at top and bottom, sealed with tape The load is heavy or bulky; compare our custom shipping boxes

Printers sometimes swap the two tuck names, which is why your dieline marks exactly where the flap closes and you sign it off before cutting starts. If the product only ever sits on a shelf, a lighter carton such as our custom straight tuck end boxes is usually enough.

How to Size a Tuck Front Mailer

We build every blank from inside dimensions, so the numbers you send are the space your product gets.

  1. Length: the distance from one rolled end wall to the other, across the front.
  2. Width: the distance from the back hinge to the front wall, the way the lid travels.
  3. Depth: the wall height, from the floor of the box to the underside of the closed lid.

Leave some slack around the product if tissue paper, a card insert or a note card goes in with it. A brand mailing chews, for example, should measure each item inside its printed dog treat packaging rather than the loose treats. Wide, shallow proportions suit this style best; for a deep box we may suggest a heavier board so the doubled walls stay upright.

Materials

E-Flute Corrugated

About a sixteenth of an inch thick, with a wavy core that soaks up bumps. Most mailers that travel with no outer carton are made from it.

SBS Paperboard

Smooth white card that holds fine type and foil. Choose it for light kits that sit on a shelf or travel inside an outer carton. Food and pharmacy goods that must arrive unopened usually sit in glued seal end cartons before they go into the mailer.

Kraft

Brown or white kraft, used as the outer liner on corrugated or as solid board, for an unbleached, natural look.

Share the packed weight and whether anything inside is fragile, and our team will match the board to the load.

Printing and Finishing for RETF Mailers

Printing

  • CMYK: photographs, gradients and multi-color art.
  • Pantone (PMS): spot inks matched to your brand colors.
  • Inside of the lid: a message that appears the moment the flap is released.
  • Front flap: a narrow band that can carry a logo or a short tagline.

Finishing

  • Matte or gloss lamination: shields the print from scuffs in the mail stream.
  • Soft touch: a suede-like coating that suits gift and beauty kits.
  • Spot UV: clear gloss laid over chosen parts of the design.
  • Foil, embossing, debossing: shine or texture on the lid where hands touch it first.

Where Tuck Front Mailers Are Used

  • Subscription kits: one plain mailer size can carry a different theme each month when it is dressed in custom box sleeves.
  • Beauty orders: a set of tubes, each already sealed in printed mascara boxes, can travel together in one branded mailer.
  • Lash brands: a card insert with slots keeps several pairs of lash packaging upright inside the box.
  • Retail and online in one: stores that also sell on pegs can ship the same item in hang tab boxes packed inside an RETF.
  • Apparel and accessories: folded tees, socks, scarves and small leather goods.
  • Corporate and welcome kits: a notebook, a mug and a few branded items sent out together. For a team screening at home, the same mailer can carry snacks and custom printed popcorn boxes with the company logo.

How to Order

  1. Request a quote: include the internal measurements, your board choice, which faces get print, and the order size.
  2. Send your artwork: drop your logo and graphics onto our template; free design support covers any layout work.
  3. Approve the proof: once the flat layout looks right and the lid flap locks on the correct edge, give us the go-ahead.
  4. We produce and ship: turnaround is 8 to 12 business days, and shipping is free.

Specifications

Product Roll end tuck front box (RETF), also called roll end front tuck (REFT) or tuck front mailer
Closure Front flap on the lid, held by locking tabs (cherry locks); no tape or glue needed
End walls Rolled double walls with tabs that lock into slots in the base
Dust flaps On the lid, folding in at both sides
Sizes Custom; made to the internal L x W x D you supply
Materials E-flute corrugated; SBS paperboard; kraft in brown or white
Printing CMYK or Pantone (PMS) inks on an offset or digital press; print on the outer faces, the inner faces, or both
Finishing Spot UV, foil stamping, soft touch film, gloss or matte lamination, embossing and debossing
Add-ons Card or corrugated insert, inside print
Supplied Flat and unglued, folded by hand
Proof Dieline plus a flat proof showing the closure, approved before cutting
Minimum order Depends on the box size and material. Request a quote for your quantity
Turnaround 8 to 12 business days
Design and shipping Free design support and free shipping

FAQs

What does RETF mean?

RETF is short for roll end tuck front. Some printers write REFT, for roll end front tuck, and both labels point to this same tape-free mailer.

The difference is where the lid flap ends up. On a tuck top, it slides down behind the front wall. On a tuck front, it finishes on the front face and is held there by locking tabs.

No. The locking tabs keep the flap in place during handling. If you want proof that nobody opened it, a printed sticker across the front flap does the job.

In E-flute corrugated, yes, for most light and mid-weight goods. Paperboard versions are better packed inside a shipper or kept for retail use.

They are small tabs cut into the closing flap. When the lid is pressed down, they catch against the walls and stop the flap from sliding out.

Rolling each end panel over itself adds stiffness, helps boxes stack without crushing and gives the locking tabs something firm to hold.

They come flat and unglued, so a stack takes little room. Your packer folds each one up at the moment an order is ready to go.

Yes. Inside printing is popular on mailers because the customer sees it first when the flap comes free.

Yes. A die-cut card or corrugated insert can give each item its own slot so nothing rattles around in transit.

Measure the space the product needs inside the box. Length runs across the front between the end walls, width runs from the hinge to the front, and depth is the wall height.

Board, size and print coverage all move the minimum, so no fixed figure applies. Add your target quantity to the quote request, and the minimum for that build is confirmed in your quote.

From proof sign-off to finished mailers, the turnaround is 8 to 12 business days.

Available Options

MATERIALS
1 Side Coated Card

SBS C1S

2 Side Coated Card

SBS C2S

Brown kraft

Brown Kraft

white kraft

White Kraft

black kraft

Black Kraft

Gold Metallic Paper

Metallic Paper

holographic paper

Holographic

textured paper

Textured

PRINTING METHODS
Offset Printing

Offset Printing

Digital Print

Digital Print

UV Printing

Screen Printing Machine

Screen Printing

FINISHING

Varnish

uv-printing

UV Coating

spot-golss-uv2

Spot UV

soft-touching-lamination

Soft Touch Lamination

Matte Lamination

Matte Lamination

Gloss Lamination

Gloss Lamination

PRINTING INKS
fluorescent-color-ink

Flourescent Inks

Ink

Water Based Inks

Pantone Book

Pantone

Metallic Pantone

Pantone Metallic

ADDITIONAL OPTIONS
Embossing

Embossing

debossing

Debossing

GOLD FOIL

Hot Foil Stamping

Window Patching

Window Patching