Custom Two Piece Rigid Boxes

Custom two piece rigid boxes pair a removable lid with a strong base, built from greyboard wrapped in printed, kraft or specialty paper. Choose the lid depth, insert and finishes such as foil, embossing and soft-touch lamination. Free design support, free shipping and 8 to 12 business days turnaround.

A lift-off lid gives your customer one calm, two-handed moment of opening, and the sturdy base keeps the product sitting exactly where you placed it. Our custom two piece rigid boxes use thick greyboard wrapped in printed or specialty paper, sized around your product and finished with your brand. You get free design support, free shipping and a turnaround of 8 to 12 business days.

Brands choose this format when the box itself should feel like part of the gift. Clothing, skincare sets, fragrance, jewelry and corporate presents all sit well in a lid-and-base box that buyers often reuse at home.

What Is a Two Piece Rigid Box?

It is a set-up box made of two separate parts that meet when the box is closed. Each part has its own job:

  • Base: the lower tray that carries the product, any insert and most of the weight.
  • Lid: a slightly larger cap that slides down over the base walls and comes off completely when lifted.
  • Greyboard walls: dense board that does not flex under thumb pressure, which is why the corners stay square on a shelf or in a stack.
  • Paper wrap: a printed or decorative sheet glued over every outer face and folded over the rim, so no bare board shows.
  • Delivered assembled: both parts are formed and glued before they leave production, so they cannot be folded flat for storage.

Choosing the Lid Depth and Shape

How far the lid reaches down the base changes both the look of the box and how it opens. Settle this first, because it affects the dieline and the board quantity.

  • Full-depth lid: the lid is as tall as the base and covers it top to bottom. It reads as one solid block and suits shirts, scarves and other folded items that may be stacked. Tabletop publishers use the same deep lid for board game boxes, where copies sit in tall piles on store shelves.
  • Partial lid: the lid covers the upper part of the base and leaves a printed band of the base on view. It is the most common choice for cosmetic sets and gift hampers.
  • Shallow cap: a thin lid that sits just over the rim. Lifting it shows the product at once, which works well for jewelry and small accessories.
  • Shoulder and neck: a third, inner collar rises above the base so the lid rests on a visible ledge. It adds a framed edge that buyers often pick for fragrance and premium spirits.
  • Shapes beyond the square: rectangles, long narrow formats and deep cubes are all possible. The same lid-over-base build also works in a six-sided form, like our hexagonal boxes for candles, sweets and seasonal gifts.

We size the lid a fraction larger than the wrapped base so it slides on smoothly without falling off when the box is lifted by the top. Tell us if you want a looser lift or a firmer hold, and we will set the clearance on the dieline.

Lid and Base Boxes Compared with Other Rigid Styles

Several premium styles on our site use the same board and papers as our two piece rigid boxes. The difference is in how the customer gets to the product.

Style How it opens Pick it when
Two piece rigid box The lid lifts straight up and comes away You want the product seen from above in one reveal, or the item is wide and flat
Rigid sliding box A drawer slides out of a fixed shell The pack is long and narrow, or holds a row of small pieces
Magnetic closure box A hinged flap swings open and snaps shut The lid should stay attached because the box will be opened many times
Folding tray and sleeve A paperboard tray slides out of a printed sleeve Lighter goods ordered in high volume, where boxes must be stored flat until packing

If your product should come out sideways rather than upward, our sleeve and tray box puts a comparable tray inside a printed band. For folding cartons and other formats, browse all our box styles.

Inserts and Interior Finishes

In two piece rigid boxes, the inside of the base is the first thing a customer sees after the lid comes off, so plan it as carefully as the outside.

  • Die-cut card insert: a paperboard platform with slots or wells, cut to the shape of each item. It keeps the whole box paper-based. Our macaron packaging boxes use the same idea, with grooved rows that hold each cookie on its edge.
  • EVA foam cavity: firm foam with pockets shaped around glass, ceramics or electronics, so nothing knocks against the walls.
  • Fabric-covered bed: velvet or satin over a padded base for watches, rings and keepsakes.
  • Tissue and ribbon lift: a folded sheet of tissue for apparel, or a ribbon tab under the product so it can be lifted out of a deep base.
  • Printed lining: a pattern, thank-you note or care instructions printed on the paper that lines the base and the underside of the lid.

Materials

Every two piece rigid box has a stiff board core hidden under a visible paper skin.

Greyboard Core

Compressed recycled board that gives the lid and base their rigidity. We choose a heavier grade for bigger boxes and heavier contents.

Printed Art Paper

Smooth coated paper that takes full-color artwork, photography and fine type before it is wrapped around the board.

Kraft and Specialty Papers

Kraft in natural brown, white or black gives an earthy look, while textured, metallic or holographic sheets add more shelf presence.

Tell us how much the filled box will weigh, and we will suggest the board grade and paper that suit it.

Printing and Finishing

Printing

  • Four-color CMYK: photography, gradients and repeat patterns on both wraps.
  • Pantone spot colors: keeps a brand shade consistent from the first order to every reorder.
  • Offset or digital: offset holds color steady across big orders, and digital suits small batches and trial artwork.
  • Inside printing: artwork on the lining that only appears once the lid is off.

Finishing

  • Foil stamping: metallic gold, silver or colored foil pressed onto the lid logo or a monogram.
  • Embossing and debossing: your logo stands up from, or sinks into, the wrap so buyers feel it.
  • Spot UV: shiny highlights on chosen artwork against a matte background.
  • Lamination: a film in soft-touch, matte or gloss that protects the wrap from scuffs each time the lid is handled.
  • Lid window: a clear film panel cut into the lid so the product can be seen without opening.

What Two Piece Rigid Boxes Are Used For

  • Cosmetic gift sets: three glosses or a lipstick trio rest on a slotted card in the base. A single tube is better served by our slim lip gloss packaging boxes.
  • Skincare kits: a moisturizer, a serum and a sheet mask share one base, each in its own well. The jar sits in a cut-out sized like our cream jar packaging.
  • Fragrance: a bottle and a travel spray held in a foam cavity, as an upgrade from single custom perfume boxes for gift editions.
  • Jewelry and watches: a shallow cap over a velvet bed for rings, necklaces and bracelets, in the same family as our luxury jewelry packaging.
  • Apparel: shirts, ties, scarves and lingerie folded in tissue under a full-depth lid.
  • Gourmet and confectionery: chocolates, tea tins and preserves arranged in a divided card insert. Our chocolate packaging page covers truffle trays and bar sleeves in more depth.
  • Corporate and event gifts: branded pens, drinkware, tech accessories and welcome kits for staff or clients.

How to Order Custom Two Piece Rigid Boxes

  1. Request a quote: share your product dimensions and weight, the lid depth you prefer, the insert you need and the number of boxes.
  2. Send your artwork: place your files on the lid and base dieline we supply, or use our free design support for the layout.
  3. Approve the proof: check the size, colors, foil areas and the inside print on the proof before production starts.
  4. We produce and ship: turnaround is 8 to 12 business days, and shipping is free.

Specifications

Product Custom two piece rigid boxes (lid and base set-up boxes)
Lid styles Full-depth lid, partial lid, shallow cap, shoulder and neck
Shapes Square, rectangle, long and narrow, deep cube, hexagon
Sizes Built around your product dimensions plus any insert
Board Greyboard (chipboard), grade matched to box size and filled weight
Wrapping papers Printed art paper, kraft (brown, white or black), textured paper, metallic paper, holographic paper
Inserts Die-cut card, EVA foam, velvet or satin covered bed, tissue, ribbon lift
Printing Pantone (PMS), CMYK, offset or digital, inside printing
Finishing Lamination (soft-touch, matte, gloss), foil stamping, embossing, debossing, spot UV
Add-ons Lid window with clear film
Supplied Fully assembled (set-up), not flat
Proof A digital proof of lid and base for your approval
Minimum order Depends on the box size and material. Request a quote for your quantity
Turnaround 8 to 12 business days
Design and shipping Free design support and free shipping

FAQs

What is a two piece rigid box?

It is a box made of a separate base and lid, both formed from thick greyboard covered in paper. The lid lifts off completely, and the box arrives already built rather than flat.

They share the lid-over-base idea. In packaging, telescope box often means a corrugated shipping carton, while our version is a rigid presentation box with a wrapped finish.

A full-depth lid suits stacked or folded goods, a partial lid shows a band of the base, and a shallow cap reveals the product fastest. Tell us the look you want and we will set the dieline accordingly.

We set a small clearance between lid and base so the fit is snug enough to hold in normal handling. For heavy contents, add a ribbon or a printed band around the box.

Two piece rigid boxes are strong enough for retail handling, but for courier delivery we suggest packing them inside a plain outer carton so the printed wrap stays clean.

Card inserts work for lighter items and keep the box paper-based. EVA foam holds glass and electronics firmly, and a velvet or satin bed suits jewelry and watches.

Yes. The lining paper can show a repeat pattern, a brief note or care tips, which the customer sees as soon as the lid is lifted.

No. They are glued and wrapped before delivery and cannot be folded, so allow storage space for the finished lids and bases.

Send the outer dimensions of the product (L x W x H), its weight and the insert you have in mind. For a set, list each item and how you want them arranged.

Yes. You receive a digital proof on the dieline showing the lid, the base and any inside print, and production starts only after you approve it.

The minimum moves with the box dimensions, the board grade and the finishes. Put your planned order size in the quote form, and our team will explain which runs we can produce for it.

Turnaround is 8 to 12 business days after you approve the proof, and shipping is free.

Available Options

MATERIALS
Grey Chipboard

Grey Chipboard

White Duplex Board

WRAPPING PAPER
1 Side Coated Card

SBS C1S

Brown kraft

Brown Kraft

white kraft

White Kraft

textured paper

Textured

black kraft

Black Kraft

Gold Metallic Paper

Metallic Paper

holographic paper

Holographic

PRINTING METHODS
Offset Printing

Offset Printing

Digital Print

Digital Print

UV Printing

Screen Printing Machine

Screen Printing

FINISHING

Varnish

uv-printing

UV Coating

spot-golss-uv2

Spot UV

soft-touching-lamination

Soft Touch Lamination

Matte Lamination

Matte Lamination

Gloss Lamination

Gloss Lamination

PRINTING INKS
fluorescent-color-ink

Flourescent Inks

Ink

Water Based Inks

Pantone Book

Pantone

Metallic Pantone

Pantone Metallic

ADDITIONAL OPTIONS
Embossing

Embossing

debossing

Debossing

GOLD FOIL

Hot Foil Stamping

Window Patching

Window Patching